Expert Answers about Tow Hooks
- How to Use Tow Hooks With 2019 Ram 3500
- There are no tow hooks for a Westin Bull Bar on your 2019 Ram 3500, but there is still a tow hook that you can use.
The only option is a bolt-on like the Curt Bolt-On Tow Hook # C22411.
I have added a link below to our entire selection of tow hooks for you to check out.
view full answer... - Location of Tow Hook on Rear of Toyota RAV4
- Since the Curt # C13149 Class III trailer hitch you referred to is a fit for 2006 to present RAV4 models, I'll assume yours falls within that range of model years.
The tow hook, if present, is on the driver's side frame rail just forward of the rear bumper. It must be removed in order to install the hitch.
I've provided a photo of the tow hook, and included a link to the install video for the Curt # C13149 hitch.
view full answer... - Is Pintle Hook of B&W Tow & Stow BWTS10055 Available Separately
- The pintle hook attachment is not available for separate purchase. So while I know this was not the news you were wanting to hear, to get the pintle hook attachment you would need to get the pintle hook and shank, the B&W Tow & Stow Pintle Hook with 2" Ball - 2" Hitches - 10,000 lbs/16,000 lbs # BWTS10055.
view full answer... - Will Trailer Drain Battery If Left Hooked Up To Tow Vehicle Overnight
- Leaving anything hooked up for power will cause a drain on your towing vehicle battery. The 12V accessory line on your trailer connector is designed to maintain a battery on your trailer.
You may want to consider installing a battery on your trailer and use a battery charger like part # CTEK56353 to charge the battery when land power is available. This would make sure your towing vehicle battery stays charged when you need it.
view full answer... - Where is the Tow Hook Attachment Point on the Passenger's Side of My 2017 RAV4?
- I have a solution for you. Even though there is not a tow hook attachment location on the passenger's side, one solution is to weld the Safety Chain U-Loop for Trailer Hitch - Weld-On # 362ChainLoopU onto the same frame location on the passenger's side of the vehicle as the hook your driver's side. Also, for a solution that doesn't require welding, the Curt Trailer Hitch Receiver # C13149 has an eye to hook up straps/hooks as well.
view full answer... - Are Demco Replacement Tow Dolly Wheel Tie-Down Straps Made of Polyester Webbing OK to Use
- Yes, it is okay to use the polyester replacement Demco tie-down straps. It is a polyester webbing, which is a very common material for straps because unlike nylon webbing, for example, it does not stretch or absorb water, making it really good for outdoor use, like on a dolly.
There are three options for replacement Demco tow dolly tie-down straps, based on the length of the strap, measured from the end of the J-hook to the closest edge of the first cross-strap
- 14-1/4" J-Hook to Edge...
view full answer... - Can Roadmaster High-Low Adapter be Used With Curt Pintle Hook For 2 Inch Hitch
- The Roadmaster High-Low Adapter for Tow Bars # RM-076 (or any similar adapter) cannot be used with the Curt Pintle Hook with 2-5/16" Ball - 2" Hitches # C45910-15-20.
These cannot be used with trailer towing they are only designed and rated for flat towing vehicles. If you need more rise or drop than the Curt offers you can go with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-526.
If you take a look at the photo below you can see how this works as a pintle hitch application.
view full answer... - Can You Mix And Match Ball And Pintle Hook Attachments On B&W Tow And Stow Mounts
- The ball and shank parts of the B&W Tow & Stow Pintle Hook # BWTS10056 and B&W Tow & Stow 2-Ball Mount # BWTS20037B are designed to not come apart, otherwise anyone could just walk up and steal your ball or pintle hook. On top of that these parts have different weight capacities so you can just mix and match pieces of them.
view full answer... - Can Curt Pintle Hook Mounting Plate be Used Only in Drop Position
- Yes I can; the Curt Pintle Hook Mounting Plate for 2-1/2" Hitches # C48239 can only be used in the drop position.
For something that can be used with a rise (up to 4-1/2 inches) you'd need the B&W Tow & Stow Pintle Hook with 2" Ball # BWTS20055 or B&W Tow & Stow Pintle Hook with 2-5/16" Ball # BWTS20056.
Both the Curt and B&W options do need to be secured to your hitch with either Pin & Clip # C21582 or Hitch Lock # 34061072-D.
view full answer... - Do you Have the Installation Instructions for the Curt Front Hitch # C31063
- I definitely have the installation instructions for the Curt Front Mount Hitch # C31063 for your 2006 Ford Ranger. I went ahead and attached the pages to this answer. I also confirmed with Curt that this hitch fits a 2006 Ford Ranger XLT 4x4.
Toward the middle of the second page of the instructions, it mentions using the factory tow hooks in the vehicle recovery and winching tips. For that reason, you do not need to remove your factory tow hooks.
view full answer... - Mounting Bracket Kit to Install SnowBear Winter Wolf Snowplow on 2001 GMC Sierra 2500
- The correct 2-point mounting kit to install a SnowBear Winter Wolf Snowplow on your 2001 Sierra 2500 long bed is part # SB397-014. I've confirmed the fit with SnowBear. The only time the tow hooks have any bearing on the installation is if you're installing a front mounted hitch to serve as the plow's attachment point. Since you're wanting to use the 2 point mount, the presence of the tow hooks won't matter.
view full answer... - Where is the Bulldog Winch Big Dog Hook Made
- The Bulldog Winch Big Dog Hook part # BDW20182 is made overseas but it does have a lifetime warranty so if there were every any issues with the tow hook, you'd be covered. It's not the same style but if you're looking for something made in the USA I recommend the BulletProof Hitches Shackle Hitch part # ED20SHACKLE.
view full answer... - Can B&W Tow & Stow Pintle Hook/Hitch Ball # BWTS10056 Be Used as Weight Distribution Hitch
- The shank portion of the B&W Tow & Stow Pintle Hook/Hitch Ball # BWTS10056 cannot be used as a component of a weight distribution system. B&W designed this adjustable pintle/ball combo hitch to offer the flexibility to tow as both a pintle hook/lunette ring and as a hitch ball, but not to serve as a basis for a weight distribution system. My contact at B&W confirmed.
We do offer a complete range of weight distribution/sway control hitch systems from Blue Ox and other manufacturers. The...
view full answer... - What is a Pintle Hitch
- A pintle hitch is primarily used in heavy duty towing situations. The hitch itself resembles a hook that can be closed around the lunette ring that is mounted on the trailer. Part # C48210 is a good example of a pintle hook.
The pintle/lunette combination is typically used on construction or other heavy duty equipment.
view full answer... - Does the Hook Probe Circuit Tester Pull at Least 5 Watts
- I contacted the manufacturer about the wattage draw of the Hook Probe Circuit Tester # PTW2993. They told me that the circuit tester will pull at least 5 watts.
view full answer... - Custom Slip-On Towing Mirrors For A 2019 Chevy Colorado
- The Longview Custom Towing Mirrors # LV97RR has both the driver and passenger side towing mirrors included in the price. These custom-fit towing mirrors will slide onto your 2019 Chevrolet Colorado's existing mirrors to expand your field of vision. They have a tool-free installation, the included arms hooks to the inside edge of the factory mirror and tighten into place with a hand knob.
view full answer... - Are Safety Chains Needed When 7,000 lb Towing Trailer
- Safety chains are required by law in many different places, and in order to find out about the specific regulations you will need to contact your local DMV.
I will say that no matter what the law may be, safety chains are a very good idea, no matter what speed you are travelling because they ensure your trailer isn't going to become disconnected and cause a potentially serious accident. When considering the cost and ease of use for safety chains relative to what could happen without using...
view full answer... - Does Flat Towing 2022 Chevy Spark Require Disconnecting Battery With Brake Buddy Stealth
- Yes, even with the Brake Buddy Stealth # HM39530 you should disconnect the battery on your 2022 Chevy Spark before flat towing it. Even with a battery maintainer the battery can and will still run down. I know this can be a pain but disconnecting the battery can be made much simpler with the Roadmaster Automatic Battery Disconnect with Switch # RM-766.
view full answer... - Products For Flat Towing A 2017 Smart Car
- The pricing for Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-52300-5, Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs Item # RM-522, RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs Item # RM-643, and Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7 are all listed on the website under each product and are separate items. They are not available as...
view full answer... - Can Parking Brakes of Dexter 7 Inch K23-103-104-00 Trailer Brakes Be Left Disconnected
- According to Dexter, the parking brake feature can be left unhooked and the brakes will work just fine for you.
view full answer...
Go To Results